3D P-WAVE VELOCITY STRUCTURE AT THE NORTHEASTERN MARGIN OF ORDOS BLOCK     

HAN Xiao-ming  Liu Fang  ZHANG Fan  CHEN Li-feng  LI Juan  LI Shuan-hu  YANG Hong-ying 《地震地质》2018,40(1):215-231

Using the 7 100 absolute first arrivals of P waves and 91 513 relative P arrival times of 726 events at the northeastern margin of the Ordos block since 2009, the 3D fine structure of P wave velocity within the depth of 15km in the crust was inverted by the double difference seismic tomography method. The results show that there exist obvious high-speed continuous bodies in the northwest of the study area, and their lateral areas increase gradually with depth, while the velocity of east and south is relatively low. The velocity inhomogeneity exists and differs at different depths. The lateral differences of velocity are related to seismicity and faults. The 5~15km depth profile shows that earthquakes tend to occur in the area with relatively high velocity or high speed transition zones, which to some extent reflects the fragility of regional crustal media and the strong differential movement of faults in vertical and horizontal directions where the crust body is easy to absorb and store strain energy and generate major earthquakes. A "Y"-shape low-velocity channel is present in the lower crust around Liangcheng, corresponding to the NW-trending Heilaoyao-Shahukou fault set, which may reveal the migration path of the Late Tertiary-Quaternary basalt eruption. The Helingeer M6.2 earthquake in 1976 was related to the formation of the locking section of the thermal welding in this area. The three-dimensional fine structure of P wave velocity presented in this paper provides intuitive seismological evidence for physical and chemical properties of crustal media and the deep tectonic environment of earthquake preparation.  相似文献   

Relocation of the Jinghe MS6.6 Earthquake Sequence on August 9, 2017 and Analysis of the Seismogenic Structure     

Liu Jianming  Gao Rong  Wang Qiong  Nie Xiaohong 《中国地震研究》2018,32(4):482-490

Based on the digital waveforms of the Xinjiang Digital Seismic Network,the Jinghe M_S6.6 earthquake sequence( M_L≥1. 0) were relocated by HypoDD,The characteristics of the spatial distribution and the seismogenic structure of this earthquake sequence were analyzed. The results show that the main shock is relocated at 44. 2639° N,82. 8294° E,and the initial rupture depth is 17. 6 km. The earthquake sequence clearly demonstrates a unilateral extension of about 20 km in the EW direction,and is mainly located at a depth of 7km-17 km. The depth profile along the aftershock direction shows that the focal depth of aftershocks tend to be shallower within 10 km to the west of the main shock,the focal depth of the aftershock sequence with the tail direction deflecting SW is deeper. The depth profile perpendicular to the earthquake sequence shows a gradual deepening of the seismic sequence from north to south,which indicates that the fault plane is dipping south.According to the focal mechanism solution,given by the Institute of Geophysics,China Earthquake Administration,and the geological structure of the seismic source region,it is inferred that the seismogenic structure of the Jinghe M_S 6.6 earthquake may be the eastern segment of the Kusongmuxieke fault.  相似文献   

不同厚度饱和砂土中群桩结构动力响应试验研究   总被引：2，自引：2，他引：0       下载免费PDF全文

李雨润  强东峰  邹泽  刘荟达  王海 《地震工程学报》2018,40(4):625-630

液化土中桩基础动力响应规律一直是工程抗震领域关注的热点问题。本文基于非液化砂土和不同厚度饱和砂土中的2×2群桩结构模型振动台试验,通过输入一定峰值加速度和频率的正弦波,对群桩在非液化土层和两种不同厚度饱和砂土层中的横向动力响应特性进行振动台试验研究。研究结果表明:在正弦波输入情况下,非液化砂土中群桩承台加速度和位移时程与台面输入时程相比,波形变化规律与峰值大小均相差不大;而对两种不同厚度饱和砂土中承台加速度和位移峰值放大较多,在相对较薄的饱和砂土中群桩承台加速度峰值较台面输入放大了1.83倍,较台面输出位移峰值放大了1.58倍;在相对较厚的饱和砂土中承台加速度和位移峰值则分别放大了2.18倍和1.91倍,说明在相同输入条件下,较厚的饱和砂土在发生液化后群桩承台的动力响应更加显著。  相似文献   

福建仙游震群序列发震构造分析研究   总被引：1，自引：0，他引：1       下载免费PDF全文

秦双龙  邱毅 《地震工程学报》2018,40(6):1306-1311

福建仙游地区自2010年8月开始出现地震序列活动,2012年地震活动水平有所提高,2013年以来地震活动水平进一步提高,ML3.0以上地震集中活跃。福建数字化地震台网对这些地震进行了较完整的监测,记录到丰富的观测资料。通过利用P、S波到时数据对ML≥1.0地震序列进行重新定位,发现地震序列空间位置和震源深度呈现出不同的时段性分布特征。同时利用福建数字化地震台网记录到的波形资料,采用"剪切-粘贴"法,获取了ML≥3.5的震源机制解和最佳震源深度。通过震群序列活动特征、震源位置分布、震源区断层活动分布以及震源机制解特征综合判断认为:仙游震群序列为库水下渗促使断裂滑动引起的构造地震,属于水库诱发型构造型地震,发震构造为穿过库区的NW向石苍断裂。  相似文献   

DEEP STRUCTURE OF NORTHERN HENAN PROVINCE AND ADJACENT AREAS DERIVED FROM GRAVITY AND SEISMIC SOUNDING DATA IN RELATION TO DISTRIBUTION OF EARTHQUAKES     

JIANG Lei  XU Zhi-ping  FANG Sheng-ming  YANG Li-pu  LI Yi-qing  XU Shun-qiang 《地震地质》2018,40(2):323-336

We conduct the wave field separation of the gravity field for northern Henan Province and adjacent areas by the wavelet multi-scale decomposition method, and obtain multi-order gravity wavelet details and regional gravity field information. Then the Parker density surface inversion is used to invert the Moho interface. Based on the analysis of wavelet details in different orders and results of three seismic sounding profiles available in this area, we attempt to reveal the deep crustal structure of the study area. Research results show that the crustal structure is dominated by uneven density distribution accompanied by uplifts and depressions in the region with obvious heterogeneities of the density in horizontal and vertical directions. The gravity field characteristics in the middle-upper crust correspond to the surface topography, the lower crust is dominated by the large-scale high-low gravity anomalies, and several major depression basins show the characteristics of low velocity and low density. At the same time, the depth of the Moho interface changes greatly, which forms the block structure pattern of the regional crustal thickness. Among these features, the area with relatively large variations of the Moho is located in the transition zone of the basin to the Taihang Mountains, or exactly the Moho mutation belt. The Moho interface of the basin area as a whole is dominated by the uplift intertwined with local variations, of which the least and largest depths are 31km and 37km, respectively. Due to the gravity isostasy, the crustal thickness is larger(about 41km)in the northwest of the Taihang Mountains, with less average crustal density. In the study area, earthquakes tend to occur around the transition zone with density changes where the Moho is locally convex. The seismogenic mechanism may be associated with upwelling of upper mantle materials, low-velocity and low-density structures in the middle-lower crust and connection of deep large faults. Moreover, the deep large faults play a controlling role in the distribution of regional earthquakes.  相似文献   

沿107.6°E南北向剖面鄂尔多斯地块及周缘地区地壳结构          下载免费PDF全文

陈洁  陈永顺  郭震  杨挺 《地球物理学报》2020,63(7):2592-2604

鄂尔多斯地块紧邻青藏高原东北缘,位于华北克拉通的西部,在我国中生代、新生代以来东部地区的构造活动中起到了重要作用.对鄂尔多斯及其周缘地区的研究可以提供有关华北克拉通的形成、演化和破坏过程的重要信息.本文选取了纵贯鄂尔多斯的107.6°E附近南北剖面上的44个流动地震台站进行分析,采用接收函数方法,进行Kirchhoff偏移成像,并且结合在该区域内前人的地震面波频散进行联合反演,获得剖面下方的地壳内部精细结构.研究结果显示:(1)莫霍面在鄂尔多斯北部较平缓,约45km深;在鄂尔多斯南部有所加深,达到50km;其北边的河套盆地的地壳厚度约为50km;南边的渭河盆地到秦岭地区及四川盆地的地壳厚度从约为40km增厚到47～50km.(2)河套盆地下方存在大规模的低速异常,最深可达25km,反映了其显著的拉张构造和沉积历史.(3)秦岭造山带下方的低速异常对应于其主要为长英质的地壳组分,可能是由于中生代的拆沉作用导致的地壳下部基性岩石层的缺失.(4)以38°N为界的鄂尔多斯地块,南北部地壳速度结构存在差异,可能表明了这两部分经历的构造历史不同.  相似文献   

Improving integrity of RC beam-column joints with deficient beam rebar anchorage     

Syafri Wardi  Yasushi Sanada  Nandita Saha  Susumu Takahashi 《地震工程与结构动力学》2020,49(3):234-260

In recent earthquakes in developing countries, severe damage was observed on reinforced concrete buildings. This study focuses on exterior beam-column joints with substandard beam rebar anchorage and seismic strengthening by installing wing walls. First, a series of experiments was conducted to investigate the seismic behavior of exterior joints with substandard beam rebar anchorage representing typical Bangladeshi buildings. Two 0.7-scaled exterior joint specimens were tested, and these specimens showed beam rebar anchorage failure and/or joint shear failure. Prior to strengthening of the joint, a series of pullout tests was conducted on postinstalled bonded anchors in low-strength concrete for strengthening design. Then, an experiment was performed to apply the strengthening method by wing walls to one of the exterior joint specimens to improve the integrity, and this method was intended to prevent the failure of beam rebar anchorage. The strengthening method is proposed to extend the development length of beam longitudinal bars by considering the embedment length along the wing walls. The test results verified the effectiveness and applicability of the proposed strengthening method to upgrade exterior RC beam-column joints with deficient beam rebar anchorage.  相似文献   

Using visibility analysis to improve point density and processing time of SfM-MVS techniques for 3D reconstruction of landforms     

Álvaro Gómez-Gutiérrez  Trent Biggs  Napoleon Gudino-Elizondo  Paz Errea  Esteban Alonso-González  Estela Nadal Romero  José Juan de Sanjosé Blasco 《地球表面变化过程与地形》2020,45(11):2524-2539

Image network geometry, including the number and orientation of images, impacts the error, coverage, and processing time of 3D terrain mapping performed using structure-from-motion and multiview-stereo (SfM-MVS). Few studies have quantified trade-offs in error and processing time or ways to optimize image acquisition in diverse topographic conditions. Here, we determine suitable camera locations for image acquisition by minimizing the occlusion produced by topography. Viewshed analysis is used to select the suitable images, which requires a preliminary digital elevation model (DEM), potential camera locations, and sensor parameters. One aerial and two ground-based image collections were used to analyse differences between SfM-MVS models produced using: (1) all available images (ALL); (2) images selected using conventional methods (CON); and (3) images selected using the viewshed analysis (VIEW). The resulting models were compared with benchmark point clouds acquired by a terrestrial laser scanner (TLS) and TLS-derived DEMs. The VIEW datasets produced denser point clouds (28–32% more points) and DEMs with up to 66% reduction in error compared with CON datasets due to reduction of gaps in the DEM. VIEW datasets reduced processing time by 37–76% compared with ALL, with no reduction in coverage or increase in error. DEMs produced with ALL and VIEW datasets had similar slope and roughness, while slight differences that may be locally important were observed for the CON dataset. The new method helps optimize SfM-MVS image collection strategies that significantly reduce the number of images required with minimal loss in coverage or accuracy over complex surfaces. © 2020 John Wiley & Sons, Ltd.  相似文献   

城市场景结构感知的网格模型简化算法     

张春森  张会  郭丙轩  彭哲 《测绘学报》2020,49(3):334-342

针对二次误差测度(QEM)网格简化算法全局几何特征信息损失严重的缺点,提出一种具有结构感知功能面向城市三维模型重建的网格简化算法。该算法顾及城市影像中平面结构特征,以代理平面为全局特征约束条件,使模型在简化过程中全局结构特征更多地被保持,以利于多层次细节模型(LOD技术)、网格优化提速等模型后续操作。以倾斜摄影获取影像生成的初始三角网格模型为试验数据,采用所给算法对其进行网格简化并与QEM算法进行对比。结果表明:所给算法简化精度及简化效率均优于QEM算法。  相似文献   

Evaluation of clayed silt properties on the behavior of hydrate production in South China Sea     

《China Geology》2020,3(3):362-368

Gas hydrate is one kind of potential energy resources that is buried under deep seafloor or frozen areas. The first trial offshore production from the silty reservoir was conducted in the South China Sea by the China Geological Survey (CGS). During this test, there were many unique characteristics different from the sand reservoir, which was believed to be related to the clayed silt physical properties. In this paper, simulation experiments, facilities analysis, and theoretical calculation were used to confirm the hydrate structure, reservoir thermo-physical property, and bond water movement rule. And the behavior of how they affected production efficiency was analyzed. The results showed that: It was reasonable to use the structure I rather than structure II methane hydrate phase equilibrium data to make the production plan; the dissociation heat absorbed by hydrate was large enough to cause hydrate self-protection or reformation depend on the reservoir thermal transfer and gas supply; clayed silt got better thermal conductivity compared to coarse grain, but poor thermal convection especially with hydrate; clayed silt sediment was easy to bond water, but the irreducible water can be exchanged to free water under high production pressure, and the most obvious pressure range of water increment was 1.9–4.9 MPa.  相似文献